Kia Sorento: Starter Reassembly

Starter Disassembly

1. Disconnect the M-terminal (A) on the magnet switch assembly (B). 2. After loosening the screws (A), detach the magnet switch assembly ...

Starter Inspection

Starter Solenoid Inspection 1. Disconnect the lead wire from the M-terminal of solenoid switch. 2. Connect the battery as shown. If ...

See also:

Special Service Tools
Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) ...

Input Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition (°C)°F ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (0.95 ~ 1.55) 0.950 ~ 1.55 Output voltage ...

Fuel Sender Installation
1. Install in the reverse order of removal. ...