1. |
Disconnect the M-terminal (A) on the magnet switch assembly (B).
|
2. |
After loosening the screws (A), detach the magnet switch assembly
(B).
|
3. |
Loosen the through bolts (A).
|
4. |
Remove the brush holder assembly (A), yoke (B) and armature (C).
|
5. |
Remove the lever plate (B) and lever packing (A).
|
6. |
Remove the packing (A) and shield (B).
|
7. |
Disconnect the planet gear (A).
|
8. |
Disconnect the planet shaft assembly (or reducer assembly) (A)
and lever (B).
|
9. |
Press the stopper (A) using a socket (B).
|
10. |
After removing the stop ring (A) using stop ring pliers (B).
|
11. |
Disconnect the stopper (A), overrunning clutch (B), internal gear
(C), planet shaft (D) and/or gasket sheet (E).
|
12. |
Reassembly is the reverse of disassembly.
|
Front Fog Lamps Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front tire wheel guard.
(Refer to Body - "Front bumper")
...
Alternator Description
The Alternator has eight built-in diodes, each rectifying AC current to
DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage ...
Front Wiper Motor Inspection
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from the battery to terminal ...