1. |
Remove the alternator cover (A) using a screw driver after loosening
the nuts (B).
|
2. |
Remove the slip ring guide (A) and then loosen the mounting bolts
and disconnect the brush holder assembly (B).
|
3. |
Remove the pulley (A) using the SST (09373-27000) (B).
|
4. |
Loosen the 4 through bolts (A).
|
5. |
Disconnect the rotor (A) and cover (B).
|
6. |
Reassembly is the reverse order of disassembly.
|
General
1.
Basically, all measurements in this manual are taken with a tracking
gauge.
2.
When a measuring tape is used, check to be sure there is ...
Starter Reassembly
1.
Reassemble in the reverse order of disassembly.
...
Special Tools
Tool (Number and name)
Illustration
Use
09793-21000
Door hinge adjusting wrench
Adjustment, removal and installationof the door hinge
...