1. Overrun Alternator Pully (OAP) 2. Front bracket 3. Front bearing 4. Rotor 5. Rear bearing |
6. Rear bracket 7. Through bolt 8. Regulator assembly 9. Regulator bolt 10. Rear cover |
Inspection
1.
Turn ignition switch OFF.
2.
Remove the air duct.
(Refer to Engine Mechanical System - "Air cleaner")
...
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
1.
...
Curtain Airbag (CAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty
seconds.
...