Kia Sorento: Spark Plug Installation - Ignition System - Engine Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Spark Plug Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Electrical System / Ignition System / Spark Plug Installation

1.
Install in the reverse order of removal.

Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)

Spark Plug Removal
1. Remove the ignition coil. (Refer to Ignition System - "Ignition Coil") 2. Using a spark plug wrench, remove the spark plu ...

Charging System
...

See also:

Rear Driveshaft Reassembly
1. Wrap tape around the driveshaft splines (TJ side ) to prevent damage to the boots. 2. Apply grease to the driveshaft and install the boo ...

Front Impact Sensor (FIS) Removal
   • Removal of the airbag must be performed according to the precautions/ procedures des ...

Rear Glass Defogger Switch Inspection
1. It will be able to diagnose defects of rear glass defogger with GDS quickly. GDS can operates actuator forcefully, input/output value monitoring and self diagnosis. ...

Copyright В© www.ksmanual.com 2014-2024