Kia Sorento: Ignition Coil Removal - Ignition System - Engine Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Ignition Coil Removal

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Removal

1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).

  
•
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.
Remove the ignition coil (A).

Ignition Coil Circuit Diagram
...

Ignition Coil Installation
1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

See also:

Installation
   • Install the component with the specified torques. • ...

Specifications
ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33 (5.0, 71.12) Internal resistance(Ω) ...

Starter Components
1. Front housing 2. Starter solenoid assembly 3. Lever 4. Lever packing 5. Planet shaft assembly 6. Planetary gear assembly 7. Packing 8. Shield 9. Amature assem ...

Copyright © www.ksmanual.com 2014-2024