1. |
Remove the oil gauge(A).
|
2. |
Remove the intake manofold.
(Refer to Intake And Exhaust System - "Intake Manifold")
|
3. |
Remove the oil level pipe(A).
|
4. |
Install in the reverse order of removal.
|
In-car Sensor Inspection
1.
Turn the ignition switch ON.
2.
Blow air with changing temperature into the in-car sensor air
inlet. Measure the sensor resistance betwe ...
TPMS Sensor Installation
Sensor Fit
•
Handle the sensor with care.
•
...
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...