Kia Sorento: Oil Cooler Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Installation
| 1. |
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
|
| 2. |
Apply a light coat of engine oil to the oil filter packing surface (A),
and then install the oil filter.
|
| 3. |
Connect the oil cooler coolant hoses (B).
|
| 4. |
Fill the radiator with coolant and check for leaks.
|
Oil Cooler Removal
1.
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
2.
Disconnect the oil cooler coo ...
Oil Pan Removal
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the A/C compressor.
(Refer to Heating, Ve ...
See also:
Front Seat Belt Replacement
Front Seat Belt Replacement
•
When installing the belt, make sure not to damaged the
...
Trailer towing
If you are considering towing with your vehicle, you should first check with
your country's Department of Motor Vehicles to determine their legal requirements.
Since laws vary the requirements f ...
Tilting the sunroof
Before opening or closing the sunroof, open the roller blind (refer to the following
page for instructions on how to use the roller blind).
To open the sunroof, push the sunroof control lever upwa ...
Copyright В© www.ksmanual.com 2014-2024