Kia Sorento: Oil Cooler Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Lubrication System / Oil Cooler Removal
| 1. |
Loosen the drain plug, and drain the coolant. Remove the radiator cap
to help drain the coolant faster.
|
| 2. |
Disconnect the oil cooler coolant hoses (A).
|
| 3. |
Using the SST (09263-2E000), remove the oil filter (A).
|
| 4. |
Loosen the mounting bolt (A) and remove the oil cooler assembly (B).
|
Engine Oil Inspection
1.
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
...
Oil Cooler Installation
1.
Apply a light coat of engine oil to the oil cooler packing surface (A),
and then install the oil cooler with fix bolt (B).
Tightening torque:
...
See also:
Drive Plate Removal and Installation
1.
Remove the automatic transaxle .
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate ( ...
Specifications
▷ Type: Combination of output signals from 4 terminals
▷ Specifications
Power supply (V)
12
Output type
Pin to Pin
▷ Signal ...
IMS Control Switch Installation
Make sure that the IMS control switch connectors and related connectors
are plugged in properly.
Check the IMS c ...
Copyright В© www.ksmanual.com 2014-2024