1. |
Check the engine oil quality.
Check the oil deterioration, entry of water, discoloring of thinning.
If the quality is visibly poor, replace the oil.
|
2. |
Check the engine oil level.
After engine warm up stop the engine wait 5 minutes then check the oil
level. Oil level should be between the "L" and "F" marks on the dipstick.
If low check for leakage and add oil up to the "F" mark.
|
Selection Of Engine Oil
For best performance and maximum protection of all types of operation,
select only those lubricants which :
|
Water pump Inspection
1.
Check each part for cracks, damage or wear, and replace the coolant
pump assembly if necessary.
2.
Check the bearing for damage, abnorm ...
Fuel Pump Inspection
[Fuel pump motor]
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump assembly.
...
Circuit Diagram
...