1. |
Loosen the drain plug, and then drain the engine coolant.
Remove the radiator cap to help drain the coolant faster.
|
2. |
Remove the drive belt after turning the drive belt tensioner counterclockwise.
(Refer to Timing System - "Drive Belt")
|
3. |
Remove the water pump pulley (A).
|
4. |
Remove the water pump sub assembly (A) with the gasket.
|
5. |
Remove the exhaust manifold heat protector.
(Refer to Intake And Exhaust System - "Exhaust Manifold")
|
6. |
Remove the water pump housing (B) with the gasket and the water inlet
pipe (A).
|
7. |
Install in the reverse order of removal with a new water pump gasket.
|
8. |
Fill the engine coolant.
|
9. |
Start the engine and check for leaks.
|
10. |
Recheck the coolant level.
|
4WD ECU Installation
1.
Install in the reverse order of removal.
2.
Prior to installing a new ECU, upload the original ECU’s clutch
learing to the replacement ...
Parking Brake Pedal Assembly Installation
1.
Install the holding clip (A, B) after fixing the parking brake
cable.
2.
Install the parking brake pedal, and then install the p ...
Description
An inverter is a device that transforms the DC voltage from the battery
into an AC voltage (115 V). The inverter can power various electrical devices
that consume 150 W or less, including mob ...