1. |
Disconnect the battery negative terminal.
|
2. |
Loosen the drain plug and drain the engine coolant.
|
3. |
Remove the radiator upper hose and lower hose.
(Refer to Cooling System - "Radiator")
|
4. |
Disconnect the connectors and then remove the wiring protector (A).
|
5. |
Disconnect the E.T.C cooler hose (A) and the remove the water temperature
control assembly(A).
|
6. |
Install in the reverse order of removal.
|
Lane Departure Warning System (LDWS) Unit Installation
1.
Install the LDWS unit.
2.
Install the LDWS unit cover.
3.
Check LDWS system operation.
...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...