Kia Sorento: Radiator Inspection
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Cooling System / Radiator Inspection
Radiator Cap Testing
| 1. |
Remove the radiator cap, wet its seal with engine coolant, and then
install it on a pressure tester.
|
| 2. |
Apply a pressure of 79.4 ~ 122.58 kPa (0.95 ~ 1.25 kgf/cm², 11.5 ~ 17.78
psi).
|
| 3. |
Check for a drop in pressure.
|
| 4. |
If the pressure drops, replace the cap.
|
Radiator Leakage Test
| 1. |
Wait until engine is cool, then carefully remove the radiator cap and
fill the radiator with engine coolant, then install it on the pressure
tester.
|
| 2. |
Apply a pressure tester to the radiator and apply a pressure of 93.16
~ 122.58 kPa (0.95 ~ 1.25 kgf/cm², 13.51 ~ 17.78 psi).
|
| 3. |
Inspect for engine coolant leaks and a drop in pressure.
|
| 4. |
Remove the tester and reinstall the radiator cap.
|
Radiator Removal and Installation
1.
Disconnect the battery terminals.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner" ...
Cooling Fan Components
1. Upper air guard
2. Cooling fan control module
3. Cooling fan shroud
4. Fan motor
5. Cooling fan
...
See also:
Description
Power tailgate is an electro-mechanical system designed to provide power
opening and closing of the tailgate through the push of a button of a remote
key (fob), console switch, inner switch o ...
Ignition Coil Inspection
1.
Measure the primary coil resistance between terminals (+) and
(-).
Standard value:
0.62Ω В± 10%
...
Record your key number
The key code number is stamped on the bar code tag attached
to the key set. Should you lose your keys,
this number will enable an authorized Kia dealer to duplicate the keys easily.
Remove the ba ...
Copyright В© www.ksmanual.com 2014-2024