1. |
Check the crankshaft bearing oil clearance.
Crankshaft Bore Identification Mark
Letters have been stamped on the block as a mark for the size of each
of the 5 main journal bores.
Use them, and the numbers or bar stamped on the crank (marks for main
journal size), to choose the correct bearings.
Cylinder Block Specifications
Crankshaft Journal Identification Mark
Crankshaft Specifications
Crankshaft Bearing Identification Mark
Crankshaft Bearing Specifications
Selection Chart For Crankshaft Bearings
|
2. |
Check crankshaft end play.
Using a dial indicator, measure the thrust clearance while prying the
crankshaft back and forth with a screwdriver.
If the end play is greater than maximum, replace the thrust bearings
as a set.
|
3. |
Inspect main journals and crank pins.
Using a micrometer, measure the diameter of each main journal and crank
pin.
|
SRS Control Module (SRSCM) Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that does not. The ...
Components Location
1. Fuel tank
2. Fuel pump
3. Fuel filter
4. Fuel pressure regulator
5. Canister
6. Fuel tank air filter
7. Fuel tank band
8. Fuel tank pressure sensor (FTPS)
9. ...
Driver Airbag (DAB) Module and Clock Spring Installation
1.
Set the front tires straight-ahead before assembling the steering
wheel.
...