Thoroughly clean all parts to be assembled.
Before installing the parts, apply fresh engine oil to all sliding and
rotating surfaces.
Replace oil seals with new ones.
|
1. |
Install valves.
|
2. |
Install the MLAs after appling engine oil.
Check that the MLA rotates smoothly by hand.
|
Emergency Fastening Device (EFD) Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the EFD cover pad (A).
...
Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and
is one of the most important sensors of the engine control system. If there
is no CKPS signal input, the engine may stop ...
Transfer Fluid Inspection
•
Transfer oil should be inspected and refilled every 60000
km (40000 mile) / 4 year.
...