1. |
Remove the cylinder head cover.
(Refer to Cylinder Head Assembly - "Cylinder Head Cover")
|
2. |
Set No.1 cylinder to TDC/compression.
|
3. |
Remove the service hole bolt(A) of the timing chain cover.
|
4. |
Release the ratchet of the timing chain tensioner by pulling the link
down using a thin rod.
|
5. |
Remove the high pressure fuel pump bracket(A).
|
6. |
Remove the camshaft.
|
7. |
Disconnect the intake CVVT assembly(A) and exhaust CVVT assembly(B)
from camshaft(C).
|
A/C Pressure Transducer Description
The A/C Pressure Transducer (APT) converts the pressure value of high
pressure line into voltage value after measuring it. By converted voltage value,
engine ECU controls the cooling fan by o ...
Windshield Deicer Switch Installation
1.
Install the heater control unit.
2.
Install the center fascia panel.
...
Fuel Pressure Regulator Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Release the fixing hooks, and then remove the regulator c ...