Kia Sorento: Timing Chain Inspection - Timing System - Engine Mechanical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Timing Chain Inspection

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Mechanical System / Timing System / Timing Chain Inspection

Sprockets, Hydraulic Tensioner, Chain Guide, Tensioner Arm, Timing Chain

1.
Check the CVVT sprocket, crankshaft sprocket teeth for abnormal wear, cracks or damage. Replace if necessary.
2.
Check a contact surface of the chain tensioner arm and guide for abnormal wear, cracks or damage.
Replace if necessary.
3.
Check the hydraulic tensioner for its piston stroke and ratchet operation. Replace if necessary.
4.
Check the timing chain for its elongation, abnormal wear or damage. Replace if necessary.
Timing Chain Removal
1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Turn the crankshaft pulley and ...

Timing Chain Installation
1. Install the balance shaft chain. (Refer to Lubrication system - "Balance Shaft & Oil Pump") 2. Install the crankshaft ...

See also:

Audio Unit Components
Connector Pin Information No Connector A Connector B 1 Rear left speaker (+) CAN high 2 Front left speaker (+) - ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when t ...

Battery Sensor Description
Vehicles have many control units that use more electricity. These units control their own system based on information from diverse sensors. It is important to have a stable power supply as th ...

Copyright В© www.ksmanual.com 2014-2024