1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
3. |
Disconnect the clock connector (A).
|
4. |
Disconnect the heater and A/C controller connectors (A).
|
5. |
Remove the heater & A/C controller (A) from the center facia after
loosening the mounting screws.
|
6. |
Install in the reverse order of removal.
|
SRS components and functions
The SRS consists of the following components:
1. Driver's front air bag module
2. Passenger's front air bag module
3. Side impact air bag modules
4. Curtain air bag modules
5. Retractor ...
Input Speed Sensor Installation
1.
Install in the reverse order of removal.
•
...
Rear Assist Arm Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the rear assist arm for deformation.
...