1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
3. |
Disconnect the clock connector (A).
|
4. |
Disconnect the heater and A/C controller connectors (A).
|
5. |
Remove the heater & A/C controller (A) from the center facia after
loosening the mounting screws.
|
6. |
Install in the reverse order of removal.
|
SRS Control Module (SRSCM) Description
The primary purpose of the SRSCM (Supplemental Restraints System Control
Module) is to discriminate between an event that warrants restraint system deployment
and an event that does not. The ...
IMS Control Switch Inspection
1.
Disconnect the IMS control switch connector.
2.
With the power IMS control switch in each position, make sure
that continuity ex ...
Components Location
1. Front axle
2. Front lower arm
3. Drive shaft
4. Sub frame
5. Stabilizer bar
6. Steering gearbox
7. Stabilizer link
8. Front strut assembly
...