1. |
Disconnect the negative (-) battery terminal.
|
2. |
Recover the refrigerant with a recover/recycling/charging station.
|
3. |
When the engine is cool, drain the engine coolant from the radiator.
|
4. |
Remove the rear luggage side trim.
(Refer to Body - "Interior Trim")
|
5. |
Remove the rear wheel guard.
(Refer to Body - "Body Side Moldings")
|
6. |
Loosen the refrigerant line mounting nuts, and then remove the
rear refrigerant line (A).
|
7. |
Loosen the refrigerant line mounting bolts, and then remove the
rear upper refrigerant line (A).
|
8. |
Remove the rear heater unit after disconnecting the connectors
and loosening the mounting bolts.
|
9. |
Remove the evaporator core cover (A).
|
10. |
Remove the evaporator core (A).
|
11. |
Install in the reverse order of removal.
|
Hill-start assist control (HAC)
A vehicle has the tendency to roll back on a steep hill when it starts to go
after stopping. The Hill-start Assist Control (HAC) prevents the vehicle from rolling
back by applying the brakes automat ...
Installation
•
Install the component with the specified torques.
•
...
Direct Electro Hydraulic Actuator Coupling Description
4WD ECU processes signals from various sensors and determines the current
road and driving conditions. The ECU then utilizes this information to implement
precision control over the 4WD coupl ...