Kia Sorento: Intake Actuator Description - Blower - Heating,Ventilation And Air Conditioning - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Intake Actuator Description

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Replacement
1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Roof Antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof Trim Assembly") 2. Disconnect the power cable (A). ...

Antenna Installation
1. Connect the roof antenna cables and connectors. 2. Install the rear roof trim.    ...

Installation
1. Combustion seal 2. Rubber washer 3. Support disc 4. O-ring ...

Copyright В© www.ksmanual.com 2014-2024