1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the passenger side crash pad under cover (A).
|
3. |
Disconnect the blower motor connector (A) and then remove the
blower motor (B) after loosening the screws.
|
4. |
Install in the reverse order of removal.
|
Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...
Description
Evaporative Emission Control System prevents fuel vapor stored in fuel
tank from vaporizing into the atmosphere. When the fuel evaporates in the fuel
tank, the vapor passes through vent hoses ...
Windshield Glass Removal
•
Put on gloves to protect your hands.
•
...