Kia Sorento: Blower Unit Components
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Blower / Blower Unit Components
| 1. Intake Case (LH) 2. Intake Case (RH) 3. Intake Door 4. Cowl Seal 5. NVH Seal |
6. Blower Upper Case 7. Cluster Ionizer 8. Blower Lower Case 9. Power Mosfet (DATC) 10. Blower Resistor (Manual) |
11. Blower Motor 12. Air Cleaner Filter Cover 13. Air Cleaner Filter 14. Intake Actuator |
Blower
...
Blower Unit Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/recycling/charging station.
3.
...
See also:
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH
& RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner
seat belt helps to reduce ...
Troubleshooting, Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio,
the CD player, and speaker. Troubleshooting enables you to confine the problem
to a particular area.
Chart 1 ...
Copyright В© www.ksmanual.com 2014-2024