Kia Sorento: Auto Defogging Actuator Replacement
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Heater / Auto Defogging Actuator Replacement
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the cowl side trim.
(Refer to Body - "Crash Pad")
|
| 3. |
Using a screwdriver or remover, remove the crash pad side cover
(A).
|
| 4. |
Disconnect the stopper (B) from the glove box (A).
|
| 5. |
Disconnect the air damper (A) from the glove box (B).
|
| 6. |
Disconnect the pins (A) and then remove the glove box (B).
|
| 7. |
After loosening the mounting screws, then remove the crash pad
side garnish [RH] (A).
|
| 8. |
After loosening the mounting screws, then remove the crash pad
under cover (A).
|
| 9. |
After loosening the mounting screws, then remove the glove box
housing (A).
|
| 10. |
Disconnect the glove box lamp connector (A).
|
| 11. |
Disconnect the connector and then remove the auto defogging actuator
(A) after loosening the mounting screws.
|
| 12. |
Install in the reverse order of removal.
|
Auto Defogging Actuator Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defoggin ...
Blower
...
See also:
Components
1. TPMS sensor (RR)
2. TPMS sensor (FR)
3. TPMS sensor (FL)
4. TPMS sensor (RL)
5. Receiver
...
Auto Head lamp leveling Unit Circuit Diagram
...
Audio Unit Installation
1.
Connect the audio unit connectors and cable.
2.
Install the audio unit.
3.
Install the center facia panel.
...
Copyright В© www.ksmanual.com 2014-2024