1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the driver's side crash
pad side cover.
|
3. |
After loosening the mounting screws, remove the crash pad lower
panel (A).
|
4. |
Push the lock pin (B), disconnect the diagnosis connector (C).
|
5. |
After loosening the mounting bolts, then remove the reinforce
panel (A).
|
6. |
Remove the driver's side shower duct after loosening the screw.
|
7. |
Disconnect the connector and then remove the mode control actuator
(A) after loosening the mounting screws.
|
8. |
Install in the reverse order of removal.
|
Engine Room Under Cover Components
1. Under Cover
2. Side Cover (RH)
3. Side Cover (LH)
...
Spark Plug Installation
1.
Install in the reverse order of removal.
Tightening torque:
14.7 ~ 24.5 N.m (1.5 ~ 2.5 kgf.m, 10.8 ~ 18.0 Ib-ft)
...
Description
Power tailgate is an electro-mechanical system designed to provide power
opening and closing of the tailgate through the push of a button of a remote
key (fob), console switch, inner switch o ...