1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the glove box housing.
(Refer to Body -"Crash Pad")
|
3. |
Disconnect the cluster ionizer connector (A).
|
4. |
Remove the screws and then remove the cluster ionizer (B).
|
5. |
Install in the reverse order of removal.
|
Troubleshooting, Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio,
the CD player, and speaker. Troubleshooting enables you to confine the problem
to a particular area.
Chart 1 ...
Cruise Control
The cruise control system is engaged by the cruise "ON/OFF" main switch
located on right of steering wheel column. The system has the capability to
cruise, coast, accelerate and res ...
Cylinder Block Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
...