1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the auto defogging sensor cover (A).
|
3. |
Disconnect the connector (B) and then remove the auto defogging
sensor (C).
|
4. |
Install in the reverse order of removal.
|
Air Ventilation Seat Removal
1.
Remove the seat back cover (A).
(Refer to Body - "Front seat")
2.
Remove the blower fan (A) after removing the scr ...
Special Service Tools
Tool (Number and name)
Illustration
Use
Alternator pulley remover wrench
(09373-27000)
Removal and installation of alternator pulley
...
Fuel Filler Door Release Actuator Inspection
1.
Remove the fuel filler cover (A) after loosening screws (2EA).
2.
Remove the fuel filler door module (A).
...