Kia Sorento: Auto Defogging Sensor Description

The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog by controlling the intake actuator, A/C, auto defogging actuator, blower motor rpm, and mode actuator.

Ambient Temperature Sensor Replacement

1. Disconnect the negative (-) battery terminal. 2. Remove the front bumper. (Refer to Body - "Front Bumper") ...

Auto Defogging Sensor Inspection

To inspect and diagnose the sensor, refer to Self-Diagnosis procedure and DTC guide. ...

See also:

Water pump Components
1. Water pump pulley 2. Water pump 3. Water pump gasket 4. Water pump housing 5. Water pump housing gasket 6. O-ring 7. Water inlet pipe ...

Troubleshooting
Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem. Check each part in order. ...

Component Location (2)
1. Door outside handle button 2. Door outside handle 3. Bumper antenna 4. Tailgate switch ...