1. |
Disconnect the negative (-) battery terminal.
|
2. |
With a flat-head screwdriver, remove the photo sensor (A) from
the center of the defrost nozzle after disconnecting the connector (B).
|
3. |
Install in the reverse order of removal.
|
Tire and wheels
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended ...
Inspection
•
Thoroughly check connectors for looseness, poor connection,
bending, corrosion, cont ...
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
1.
...