1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
3. |
Disconnect the clock connector (A).
|
4. |
Disconnect the heater and A/C controller connectors (A).
|
5. |
Loosen the mounting 2 screws and then remove the in-car sensor
(A).
|
6. |
Install in the reverse order of removal.
|
Lift And Support Points
When heavy rear components such as suspension, fuel tank, spare tire, tailgate
and trunk lid are to be removed, place addition ...
Installation
1.
Install in the reverse order of removal.
•
...
Component Location
[Engine Room]
1. Receiver-drier
2. Condenser
3. Ambient temperature Sensor
4. Compressor
5. Discharge Hose
6. Suction & Liquid Tube Assembly
7. Servic ...