1. |
Recover the refrigerant with a recovery/recycling/charging station.
|
2. |
Disconnect the negative (-) battery terminal.
|
3. |
Remove the front bumper.
(Refer to Body - "Front Bumper")
|
4. |
Remove the air duct (A).
|
5. |
Remove the 2 nuts, and then disconnect the discharge line and
liquid line (A) from the condenser.
|
6. |
Remove the side air guard (A).
|
7. |
Remove the condenser (A) from radiator.
|
8. |
Install in the reverse order of removal.
|
Power Door Lock Switch Installation
Driver Power Window Main Switch
1.
Install the driver power window switch assembly and connectors.
2.
Install the front door trim.
...
Input Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
...