1. |
Remove the engine room under cover by loosening the mounting clip
(A) and bolts (B).
|
2. |
Separate the front portion of the front wheel guard from the wheel
base.
(Refer to Body - "Body Side Moldings")
|
3. |
Remove the engine room right side cover.
|
4. |
Loosen the drive belt.
(Refer to Engine Mechanical System - "Drive Belt")
|
5. |
Remove the center bolt (A) while holding the pulley with a disc
& hub bolt remover (09977-25100).
|
6. |
Loossen the hub bolts and then remove the hub assembly.
|
7. |
Remove the pulley (B) after removing the snap ring (A) with a
snap ring plier.
|
8. |
Reassemble in the reverse order of disassembly.
|
Cylinder Block Inspection
1.
Remove gasket material.
Using a gasket scraper, remove all the gasket material from the top
surface of the cylinder block.
2.
Cl ...
How to use this manual
We want to help you get the greatest possible driving pleasure from your vehicle.
Your Owner’s Manual can assist you in many ways.We strongly recommend that you read
the entire manual. In order to ...
Schematic Diagrams
Circuit Diagram - ESC (1)
Circuit Diagram - ESC (2)
Circuit Diagram - ESC (3)
Circuit Diagram - ESC (4)
ESC connector input/output
Connector Terminal
Specifica ...