1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the right luggage side trim.
(Refer to Body - "Luggage Side Trim")
|
3. |
Disconnect the connector from the AC inverter unit.
|
4. |
Remove the AC inverter unit (A) after loosening the mounting nuts
(3EA).
|
Engine Control Module (ECM) Adjustment
•
After replacing the ECM of the vehicle with the immobilizer, the
following procedure must be performed.
1)
[If installing a used ECM]
...
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil installation bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug installation
14.7 ~ 24. ...
Hood Replacement
Hood Assembly Replacement
•
When removing and installing the hood, an assistant is
...