Kia Sorento: Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the steering column upper and lower shrouds.
(Refer to Steering System - "Steering column")
|
| 3. |
Remove the crash pad lower panel.
(Refer to Body - "Crash pad")
|
| 4. |
Remove the ignition switch (A) after disconnecting the 6P connector
(A).
|
| 5. |
Remove the key warning and immobilizer connector (A).
|
| 6. |
Remove the key illumination lens (A).
|
| 7. |
Remove the key illumination bulb and cover (A).
|
| 8. |
If it is necessary to remove the key lock cylinder (A), remove
the key lock cylinder with key ACC.
|
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch
connector (A) from under the steering column.
2.
Che ...
Installation
1.
Install the key lock cylinder.
2.
Install the illumination bulb, lens and cover.
3.
Install the key warning ...
See also:
Starter Disassembly
1.
Disconnect the M-terminal (A) on the magnet switch assembly (B).
2.
After loosening the screws (A), detach the magnet switch assembly ...
Specifications
Items
Specification
Rated voltage
DC 12V
Operating voltage
9V ~ 16V
Operating speed
30㎞/h ~ 250㎞/h
...
Bluetooth® Wireless Technology Setting
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by Kia is under license.
Other trademarks and trade names are those of their resp ...
Copyright © www.ksmanual.com 2014-2024