Kia Sorento: Immobilizer Control Unit Installation - Immobilizer System - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Immobilizer Control Unit Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Immobilizer System / Immobilizer Control Unit Installation

1.
Install the immobilizer control unit after connecting the unit connector.
2.
Install the crash pad lower panel.
Immobilizer Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

Antenna Coil Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the steering column upper and lower shrouds (A). 3. ...

See also:

Timing Chain Cover Installation
1. Install the timing chain cover. (1) Using a gasket scraper, remove all the old packing material from the gasket surfaces. ...

Battery replacement
A smart key battery should last for several years, but if the smart key is not working properly, try replacing the battery with a new one. If you are unsure how to use your smart key or replace th ...

CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Copyright В© www.ksmanual.com 2014-2024