Kia Sorento: Auto Head lamp leveling Unit Removal
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Removal
Height Sensor & Unit
| 1. |
Disconnect the negative(-) battery terminal.
|
| 2. |
Remove the height sensor connector (A).
|
| 3. |
Loosen the mounting bolts (2EA) from height sensor bracket after
removing the linkage (A).
|
| 4. |
Remove the height sensor.
|
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
Auto Head lamp leveling Unit Installation
Height Sensor & Unit
1.
Install the height sensor.
2.
Connect the connector.
...
See also:
Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa
(kgf/cm², psi)
0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23)
Current value(mA)
...
Warning And Caution Labels
1. Fan caution
2. Radiator cap caution
3. Battery caution
Battery Caution Label Description
Warning / Caution Label (Cont'd)
A.
Keep lighted cigarett ...
Passenger Airbag (PAB) Module Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable from battery and wait for
at least thirty seconds bef ...
Copyright В© www.ksmanual.com 2014-2024