Kia Sorento: Auto Head lamp leveling Unit Description
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Head lamp leveling Device / Auto Head lamp leveling Unit Description
According to driving environment and loading state of vehicle, head lamp
lighting direction is changed to keep the driver's visibility range and to protect
the driver's vision from glare, aiming at safety driving.
Sensor mounting on the rear center arm drives the actuator mounting on
the head lamp since sensing the input signal following the vehicle's statical
changes.
Head lamp beam is automatically operated by chassis tilt.
Purpose of AHLS(Auto Headlamp Leveling System)
| • |
Compensation of headlamp visual range for changes in vehicle load.
|
| • |
Preventing oncoming traffic being blinded by excessive glare.
|
| • |
Meeting regulation
|
Auto Head lamp leveling Unit Operation
Operating Procedure
1.
Suspension angle change resulted from vehicle's load change.
2.
Height sensor signal change
...
See also:
Power Mosfet (DATC) Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower
resistor must be rep ...
Economical operation
Your vehicle's fuel economy depends mainly on your style of driving, where you
drive and when you drive.
Each of these factors affects how many miles (kilometers) you can get from a
gallon (lit ...
Blind Spot Detection Unit Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear bumper.
(Refer to Body - "Rear Bumper")
...
Copyright © www.ksmanual.com 2014-2024