Kia Sorento: Rear combination lamp Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Lighting System / Rear combination lamp Installation
| 1. |
Install the tailgate combination lamp assembly after replacing
the bulb.
|
| 2. |
Install the lamp cover to the tailgate after connecting the lamp
connector.
|
| 3. |
Install the rear combination lamp assembly after replacing the
bulbs and connecting the lamp connector.
|
Rear combination lamp Removal
1.
Disconnect the negative (-) battery terminal.
[Outside]
2.
Loose the screws (2EA) holding the rear combination lamp then
disconn ...
Troubleshooting
Symptom
Possible cause
Remedy
One lamp does not light
(all exterior)
Bulb burned out
Replace bulb
Socket, wiring or ground faulty
...
See also:
Power Mosfet (DATC) Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the passenger side crash pad under cover (A).
3.
...
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to prevent
damaging the heater line. Apply finger pressure on th ...
Components (1)
1. Driver Airbag (DAB)
2. Steering Wheel
3. Clock Spring
4. Seat Belt Pretensioner (BPT)
5. Front Side Impact Sensor (FSIS)
6. Side Airbag (SAB)
7. Passenger Airbag (PAB)
...
Copyright В© www.ksmanual.com 2014-2024