1. |
Replace the lamp bulb.
|
2. |
Install the cargo lamp assembly after connecting the lamp connector.
|
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...
Quarter Fixed Glass Installation
1.
With a putt knife, scrape the old adhesive smooth to a thickness
of about 2mm (0.08 in.) on the bonding surface around the entire quarter
fixed glass flange.
...
Components
1. TPMS sensor (RR)
2. TPMS sensor (FR)
3. TPMS sensor (FL)
4. TPMS sensor (RL)
5. Receiver
...