|
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Using a screwdriver or remover, remove the center fascia panel
(A).
|
3. |
Remove the heater control unit connectors (A).
|
4. |
Remove the heater control unit (A) with hazard switch.
(Refer to HA group - "Heater & A/C Control Unit")
|
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross Veh ...
Starter Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...