1. |
Turn the head lamp switch off.
|
2. |
Disconnect the power connector from the lamp.
|
3. |
Remove the lamp assembly.
|
4. |
Remove the dust cover.
|
5. |
Remove the ignitor clip (A) from the lamp assembly.
|
6. |
Disconnect the ignitor connector.
|
7. |
Remove the ignitor and bulb (A).
|
8. |
Installation is the reverse of removal.
|
1. |
Turn the head lamp switch off.
|
2. |
Disconnect the power connector from the lamp.
|
3. |
Remove the lamp assembly
|
4. |
Remove the dust cover.
|
5. |
Turn the bulb socket (A) counterclockwise and then remove it.
|
6. |
Remove the bulb (A) from socket.
|
7. |
Installation is the reverse of removal.
|
1. |
Turn the head lamp switch off.
|
2. |
Remove the lamp assembly
|
3. |
Turn the bulb socket (A) counterclockwise and then remove the
turn signal lamp bulb (B).
|
1. |
Turn the head lamp switch off.
|
2. |
Disconnect the power connector from the lamp.
|
3. |
Remove the head lamp assembly.
|
4. |
Remove the ballast (A) after loosening the screws (4EA).
|
5. |
Installation is the reverse of removal.
|
Spark Plug Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...
Power Flow Chart
P,N
UD/B
LR/B
26/B
35R/C
OD/C
OWC
●
▣ Direction of Rotation
...
Idler Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the idler(A).
Tightenin ...