1. |
Turn the ignition key to the ON position and then close the panoramaroof
completely.
|
2. |
Release the panoramaroof control lever.
|
3. |
Press and hold the CLOSE button for more than 10 seconds until
the sunroof has moved slightly.
|
4. |
Release the panoramaroof control lever.
|
5. |
Press and hold the CLOSE button once again within 5 seconds until
the panorama sunroof do as follows ;
|
6. |
Reset procedure of panorama system is finished.
|
1. |
The panoramaroof ECU detects the Run- time of motor
|
2. |
Motor can be operated continuously for the 1st Run-time(120 ±
10sec.).
|
3. |
Motor which is operated continuously stops operating after the
1st Run-time(120 ± 10sec.).
|
4. |
And then Motor is not operated for the 1st Cool-time(18 ± 2sec.).
|
5. |
Motor is operated for the 2nd Run-time(10 ± 2sec.) at the continued
motor operation after 1st Cool-time(18 ± 2sec.)
|
6. |
Motor which is operated continuously stops operating after the
2nd Run-time(10 ± 2sec.)
|
7. |
Motor is not operated for the 2nd Cool-time(18 ± 2sec.).
|
8. |
Motor repeats the 2nd Run-time and 2nd Cool-time at the continued
motor operation.
T1 : 120 ± 10 sec., T2 : 18 ± 2 sec.,
T3 : 10 ± 2 sec., T4 : 18 ± 2 sec.
|
Windshield Wiper-Washer Switch Installation
1.
Install the windshield wiper switch.
2.
Connect the wiper switch connector.
3.
Install the steering column u ...
Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor pr ...
ESC Control Module Components
1. Front - left tube
2. Rear - right tube
3. Rear - left tube
4. Front - right tube
5. MC2
6. MC1
7. ESC control module (HECU)
8. Bracket
...