No. |
Wire harness connector |
Panorama motor |
Blind motor |
|
|
|
|
1 |
Ground 1 |
Ground 1 |
Ground 2 |
2 |
Glass status signal / Tool fot glass |
Glass status signal/ Tool (Parameter) |
Tool (Parameter) |
3 |
IGN 2 |
IGN 2 |
- |
4 |
Tilu up switch |
Tilu up switch |
- |
5 |
- |
- |
- |
6 |
Battery 1 |
Battery 1 |
Battery 2 |
7 |
Ground 2 |
Serial |
Serial |
8 |
Vehicle speed signal |
Vehicle speed signal |
Vehicle speed signal |
9 |
Glass open switch |
Glass open switch |
Blind open switch |
10 |
Glass close switch |
Glass close switch |
Blind close switch |
11 |
Blind open switch |
|
|
12 |
Serial |
||
13 |
Blind close switch |
||
14 |
Battery 2 |
||
15 |
Blind tool |
||
16 |
- |
Overhead Console Lamp Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mounting screws (2EA).
And then remove the overhead console (A).
...
35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R Clutch.
...
Input Speed Sensor Description
Input speed sensor (A) is a vital unit that measures the rate of rotation
of the input shaft inside the transaxle and delivers the readings to the Transaxle
Control Module(TCM). The sensor pr ...