1. |
Remove the mirror wiring cover (A).
|
2. |
Remove the mirror mounting screw (A) and connector (B).
|
3. |
Remove the mirror (A) pulling up in the arrow direction.
|
Evaporator Temperature Sensor Description
The evaporator temperature sensor will detect the evaporator core temperature
and interrupt compressor relay power in order to prevent evaporator from freezing
by excessive cooling
...
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Intake Manifold Removal and Installation
1.
Disconnect the battery negative terminal.
2.
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner ...