1. |
Turn the ignition key to the "ON" position.
|
2. |
Cover the forward facing sensor.
|
3. |
Head a light to the rearward looking sensor.
|
4. |
The ECM should be darkened as soon as the rearward looking sensor
detects the light.
|
5. |
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the forward facing and rearward looking
sensors, the ECM should not be darkened.
|
35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure
inside the 35R Clutch.
...
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Using the battery checker (MCR-570 KIT), check the ba ...
Steering Gear box Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque :
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...