Kia Sorento: Rear Wiper Motor Installation
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Wiper Motor Installation
| 1. |
Install the rear wiper motor assembly.
|
| 2. |
Install the tailgate trim.
|
| 3. |
Install the rear wiper arm and rear wiper cap.
|
| 4. |
Install the rear wiper arm and blade to align with black rear
defogger line (A).
|
| 5. |
Set the rear washer nozzle on the specified spray position.
|
Rear Wiper Motor Removal
1.
Detach the rear wiper cap (A).
2.
Remove the rear wiper arm & blade (A) after removing rear wiper
HEX nut (B).
...
Rear Washer Switch Inspection
Check for continuity between the terminals while operating the wiper and
washer switch. If it is not normal condition, replace wiper and wiper switch.
Rear Wiper Switch
Rear Washer Swi ...
See also:
Illuminated ignition switch (if equipped)
Whenever a front door is opened, the ignition switch will illuminate for your
convenience, provided the ignition switch is not in the ON position. The light will
go off immediately when the igniti ...
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery ...
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Copyright В© www.ksmanual.com 2014-2024