1. |
Remove the connector (A) from the wiper motor.
|
2. |
Attach the positive (+) lead from the battery to terminal 2 and
the negative (-) lead to terminal 5.
|
3. |
Check that the motor operates at low or high speed as below table.
|
Specifications
Purge Control Solenoid Valve (PCSV)
▷ Specification
Item
Specification
Coil Resistance (Ω)
19.0 ~ 22.0 [20°C(68°F)]
Fuel Tank Pre ...
Audio Remote Control Circuit Diagram
...
Blower Motor Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a know ...