1. |
Remove the windshield wiper arm and blade after removing a nut
(B) and wiper cap (A).
|
2. |
Remove the windshield wiper arm and blade (A) after removing a
nut.
|
3. |
If necessary, release the wiper blade fixing clip by pulling up
and remove the wiper blade from the inside radius of wiper arm.
|
4. |
Remove the weather strip and the cowl top cover (A) after removing
retainers.
|
5. |
Disconnect the wiper motor connector (A) from the wiper motor
& linkage assembly.
|
6. |
Remove the windshield wiper motor and linkage assembly (A) after
removing 2 bolts.
|
7. |
Hold the wiper motor crank arm and remove the upper linkage (A)
from the wiper motor crank arm.
|
8. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
9. |
Remove the crank arm (A) after loosening a nut.
|
10. |
Remove the wiper motor (A) after loosening the screws.
|
Front Oil Seal Removal and Installation
1.
Remove the crankshaft damper pulley.
(Refer to Timing System - "Crankshaft Damper Pullty")
2.
Remove the front oil seal(A). ...
Cylinder Head Cover Components
1. Cylinder head cover
2. Gasket
...
System Block Diagram
Component Parts And Function Outline
Component part
Function
Vehicle-speed sensor
Converts vehicle speed to pulse.
ECM
Receives signals fr ...