Kia Sorento: PTG Spindle Installation - Power Tailgate Module - Body Electrical System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: PTG Spindle Installation

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Body Electrical System / Power Tailgate Module / PTG Spindle Installation

1.
Connect the PTG spindle, bracket and connector.

Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)

2.
Install the tailgate trim and Luggage side trim.
3.
Connect the negative (-) battery terminal.
PTG Spindle Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the tailgate trim and Luggage side trim. (Refer to the Body - "Tailgate& ...

Windshield Wiper/Washer
...

See also:

Front Cross Member
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

Power Tailgate Latch Removal
1. Disconnect the negative (-) battery terminal. 2. After loosening the mounting screws, then remove the tailgate trim (A). (Refer ...

Menu : My Music Mode
In My Music mode, press the key to set the Repeat, Random, Information, Delete, Delete All, and Delete Selection features. Repeat Press the key Set [ RPT] through the TUNE knob or key. ...

Copyright В© www.ksmanual.com 2014-2024