1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the tailgate trim and Luggage side trim.
(Refer to the Body - "Tailgate")
|
3. |
Disconnect the power PTG spindle connector (A).
|
4. |
Using a screwdriver (A), lift up slightly the socket clips (B)
of both ends on the lifer (D), and then remove the PTG spindle from
the bracket (C).
|
5. |
If it is necessary, remove the nuts and replace the PTG spindle
bracket (A).
|
Hood Replacement
Hood Assembly Replacement
•
When removing and installing the hood, an assistant is
...
Compressor Oil Specification
1.
The HFC-134a system requires synthetic (PAG) compressor oil whereas
the R-12 system requires mineral compressor oil. The two oils must never
be mixed.
...
Specifications
Tightening Torques
Items
N.m
Kgf.m
lb-ft
Transfer assembly mounting bolts
60.8 ~ 65.7
6.2 ~ 6.7
44.8 ~ 48.5
...